Jean-Pierre Tosoni

Reading the whole function, it seems that the RP priority is not updated when an old rp_grp_entry is found, and if priority changed, the RPgroup remapping does not take place....

If I understand correctly, the software that takes in charge multicast forwarding is the kernel, not pimd. So, tweaking the addresses is probably a job for netfilter and iptables or...

@Voronenko maybe, also check that the MTU on both interfaces is large enough to convey the packets. It looks like tap0 is a tunnel, which usually shrinks the MTU. (though...

Indeed on my platform, there seems to be a bottom limit of 125 ms under which lldpd eats all the CPU, which is strange because above this limit (say, 126ms)...

Ok thanks. In the meantime I found a side effect of using ms timers: TTL becomes 0 which is wrong. It makes the cleanup function to be rescheduled as soon...

> Question 2: I think that you can just specify add a unit to tx-interval: tx-interval 20 means 20 seconds but tx-interval 20ms means 20 milliseconds. Well, command parsing is...