joshpainter

What about custom GCODE commands for each filament that would be inserted at the top of the print kinda of like Octoprint's events? This way you could just use GCODE...

@malnvenshorn that's cool, I didn't know slic3r allows that. I use Cura and don't see any similar feature, so it seems to me that adding this feature to FilamentManager would...

(By the way you should give Klipper a shot for PETG printing. The PA feature is specifically designed to be a smarter retraction algorithm to avoid stringing and blobbing. Also...

Yep it sounds like it! From your link: "Since the root cause is pressure, LIN_ADVANCE de-couples extrusion from the other axes to produce the correct pressure inside the nozzle, adapting...

Another good reason for FM controlling these settings: one of the features I *love* about Klipper is "macros." I can define custom macros in the firmware that have custom GCODE...

Oh and a speed offset would be nice too, especially for PETG since it needs to print slower! So in review, if we had nozzle temp, bed temp and speed...

Yep I understand your point. My perspective is from always trying to make things *easier* for new users to get into 3d printing. Eventually a company like Apple will come...

Actually I think we might be able to fix this whole mess, including retroactively for any users suffering from this now, with This One Simple Fix (bolded): await conn.execute("DELETE FROM...

@trepca Unfortunately it does not, but it does change things! Now, the offer files stay "pending" forever even after I've accepted them and they show as confirmed transactions. The 'dummy'...

> @joshpainter can you try #14722 and see if it fixes the problem Hey @trepca it looks you fixed these orphaned records in the latest 1.7.1-rc2! I no longer see...