Josh Johnson

I've connected the QSPI pins for the flash on 0.2, is this something that should be added to the pin defs? 

Hi Alex, unfortunately I'd have to change the footprint to expose all the pins so not sure how to meet the requirement of exposing all the pins in the same...

Hey @giggiu16, I was able to program both of the r0.2 boards I assembled. I used [ecpprog](https://github.com/gregdavill/ecpprog) with a FT232. Let me know how you go / if there is...

@giggiu16 Nice work! If you are in the position to share what you are using it for I'd be keen to hear, otherwise have fun!

@giggiu16 Awesome! One thing I should say is that the 12F and the 25F are the same silicon, but with a different IDCODEs. If you use the open tools you'll...

Hi @amitvasudevan, I'd suggest reflowing it along with the rest of the components. You can do it with hot air but getting even heating is a bit more challenging.

Closed on accident

- Correct - OSHStencils (no relation to OSHPark) provide stencils. - Yes, you reflow the bottom side then the top side. There is no issues with the bottom side falling...

You can get away without it, I don't have one in my machine. Just make sure you add the [cold junction compensation DS18B20](https://github.com/UnifiedEngineering/T-962-improvements/wiki/Dallas-18B20-for-cold-junction-mod) in the controller board to get a...

I use leaded T4 paste so the profile won't be too useful. Main thing to keep an eye out for is that any fast ramp rates will cause the oven...