Jonathan Newman
Jonathan Newman
Yep, most def. Lemme know if you have questions!
Probably not in most situations. This is especially true if you are using a digital acquisition system, e.g. with Intan headstages and the cyclops is very far away from the...
@jsiegle, sorry, I deleted your last comment when I clicked on it, can you repost?
Ah, yes. I need to add this to the manual. When installing the arduino, I always remove the power jack using a hot air gun to prevent this.
Also to note: keeping cables short and low inductance is the best way to reduce EMI and improve the device's performance. I actually mount my LED right to the back...
Hi, This is interesting. It definitely seems like a thermal issue, although, as you've noted, this typically is inversely related with the LEDs output. The long time constant seems to...
Another easier option is to simply let the system reach thermal equilibrium before opening the shutter for the LEDs' light path.
Which commutator are you using? e.g. the Open Ephys commutator is a mil-spec grade RF rotary joint that maintaines 50-ohm transmission line through the commutation point (less chance for data...
OK, yes. That does not maintain 50-ohm transmission line. Introduces discontinuity which results in signal distortion. This is exacerbated by the fact that its right in the middle of the...
Hey all, I want to add support for our commutator to some variant of the Miniscope DAQ software. Do you all have a suggestion as to what I should be...