jonhanford

I'm using the api with node-red - for whatever its worth, I solved (okay, well, wrote around) this issue by periodically polling the activity. If the response contains "No" (As...

Have you tried flushing iptables? Looking through earlier issues, the network should support UPNP and Multicast.

> Hey mate, > > Could you share your flow for this? > > Never tinkered with node-red so not really sure where to start. > > Thanks I was...

I can confirm that using an older version of python fixes the issue. 3.8.16 works fine. You should be able to install, alongside your current version, an older version of...

So, I figured out that this happens because there's a single image_path variable that stores incoming data, which is only checked at an interval. During the check, if it updates...

Definitely going to do a PR - will take me a little while though. My hacked-together version has been humming along quite nicely on the hardware I built it for,...

Definitely smaller than 1megΩ I used a 220kΩ to cut range to 3.5m id try a 47kΩ to get it to under a meter. good luck let us know.

Well - it's not such a sophisticated device that there's any kind of range calculation - what it's detecting is frequency changes in reflected radio waves caused by motion of...