JB
I couldnt wait for the Merge, so have tried...and can now call that three people comfirmed it works !
Does anyone know if things change when we get the new Bins, or will we need to revise again in August ?
I notice this in the addon log though - is it significant ? ```` [10:34:42] INFO: Configuring Device named myups... [10:34:42] INFO: Starting the UPS drivers... **Network UPS Tools -...
thanks - yes I saw several that were similar - interestingly #1512 reports the same problem but with a slightly different product - - mine is a 650 with no...
Im running HASOS, so will need to pull out a rPi and setup a test rig....give me a week or so - and Ill give it a go.
Jim, Ive fired up a rPi and the master branch built (2.8.0.1)... which build do you suggest I try ?
Erm OK. Remember though, I'm seeing the error in 2.8.0 pulled through in the Home Assistant add in an of about a month ago...but I don't know which version was...
Hey Jim, Im not quite sure what Im doing frankly - but I *think* I have the mast branch installed and running. (although tools such as nut-scanner complain about a...
PS, any ideas why this doesnt work ? Whats the subdriver ? (I used the quoted subdriver thats 'discovered' too - no luck 'EXPLORE HID 0.2' ``` xx@raspberrypi:~/nut $ sudo...
ok done... not sure it particularly helpful... gives the same as nutdrv_qx...: ``` pi@raspberrypi:~/nut $ sudo ./drivers/usbhid-ups -s 0764 -x port=auto Network UPS Tools - Generic HID driver 0.50 (2.8.0-2306-g3d9630e0f)...