jomifa

Error messages when starting RSCPM2QTT

2

Hello, after reinstalling on another Raspbeery Pi, I get the following error messages when starting rscp2mqtt (version 3.33). pi@Pi5JMF:/opt/rscp2mqtt $ ./rscp2mqtt rscp2mqtt [3.23] E3DC system >192.168.178.31:5033< user: >[email protected]< MQTT broker...

Hello Florian, I have been using the Grohe API under node red since yesterday. If notifications from the monitored Sense devices are reported and confirmed in the official iOS app,...

topic “e3dc/wallbox/sun_mode" question

1

Hello, I have a question about the topic “e3dc/wallbox/sun_mode”. So far I have assumed that this topic is set hard via the RSCP2MQTT interface or directly via the E3DC app...

Topic e3dc/wallbox/suspended will not set correctly

7

Hello, I set the topic: “e3dc/set/wallbox/suspended” to true with the assumption that the topic: “e3dc/wallbox/suspended” will also be set to true after the next interval. This is not the case....

Topic e3dc/ems/emergency_power_available

2

Hello, I can't get a value for the topic “e3dc/ems/emergency_power_available” via mqtt. No matter if rscp2mqtt is started again or if I force the value in the .config (FORCE_PUB=e3dc/ems/emergency_power_available). rscp2mqtt...