jointerCZ
jointerCZ
I had the same or similar issue (but I did not saved the errors) when using multiple frequencies. The new build from yesterday seems to be fine so far. (VMWare...
You probably compiled it directly as I did, then I had the same experience. It is probably missing some subcomponents like Mosquitto, I used the Docker guide and that works...
OK, another question. I have currently 2 RTL SDR connected, is it possible to configure PPM and Gain for them independently? Each is for different band. I want to eventually...
Have another, by exploring the digital noises: DMR / D-Star / C4FM decoders...
It works with my 2 RTL. One is scanning 2 bands, second 4 bands. Runs stable for 2 days currently, however I found I have to have each connected via...
I get the same error with about 4000 items. This is error from the log: sdr-sdr-monitor-server-1 | [2023-02-16 13:25:16.758][exception ][django.security.TooManyFieldsSent][ERROR ] The number of GET/POST parameters exceeded settings.DATA_UPLOAD_MAX_NUMBER_FIELDS. (I was...
Is this some internal limit of the Django or can be configured? Lot of short transmissions are recorded, as I still work on defining ignored frequencies, I am at 2000...
Device delete is a workaround. The same device will then get registered under new ID.
I just got Delta 3 Plus, this solution was the only way how I was able to pull data from it to HA, NodeRed did not worked for me (never...
Solar amp limit is probably right, without XT60i cable, it should be 8A. Only with XT60i it might change to 15A. Plugging in original PV cable does nothing (but I...