johnwigley

[logcat2016-02-04-18-06-06.txt](https://github.com/rsteckler/unbounce-android/files/122872/logcat2016-02-04-18-06-06.txt) [CleanedLogcat2016-02-04-18-06-06.txt](https://github.com/rsteckler/unbounce-android/files/122873/CleanedLogcat2016-02-04-18-06-06.txt)

Thanks for replying, sorry it wasn't clear. I'll try and clarify... The particular application I have in mind is where you have a network of approximately 150 nodes that use...

Thanks for answering, that's great news. Can I ask two follow up questions: 1) Can you then use REDIRECT and TPROXY also for UDP? So both TCP and UDP can...

Thanks, I can confirm that TPROXY works fine for TCP traffic as you suggested. I have now tried an IPtables DNAT before the TPROXY, and Redsocks2 is still pulling out...

Also, I saw you commented here: https://github.com/semigodking/redsocks/issues/20#issuecomment-140291864 That TPROXY only works in the PREROUTING chain, and the Tproxy docs also suggest the same thing, however, I have just tested TPROXY...

Ok, so reviewing the code in base.c around line 240 shows that the REDIRECT specific extraction of the destination address using so_orig_dst ONLY occurs if the config option is set:...

You can see by looking at the schematic (https://raw.githubusercontent.com/jdesbonnet/RCWL-0516/master/doc/john_taylor_rcwl-0516-0.png), that to decrease the on time, you can do one of two things; either remove C2, and replace with a SMALLER...