John
John
definitely not. suppport for OSX was in there a couple of years ago but I didn't follow that any more due to lack of time. I'm pretty sure it can't...
just checked my old MAC just to realize that I had it on last time three years ago... I really don't remember the details for OSX, but maybe the commit...
not much to tell if no log is provided, but anyway: since the device in question (VR470F) seems to be RF based, the timing is a bit different for those...
looks as if your adapter can't write to the bus at all. sure you've set up ebusd-esp correctly and also the jumpers on the adapter?
@Thoro please don't misuse other ones ticket if it is not 100% related, which is not the case due to completely different setup (interface, OS, hardware)
@Koky05 I don't think temperature will have such an influence. what are we talking about? 50 degrees or higher? can you post a raw logging with bytes (`--lograwdata=bytes`) from a...
from the logs it looks as if your adapter can't write to the bus at all. please post the jumper settings here as well as the config page of ebusd-esp....
I repeat: > please post the jumper settings here as well as the config page of ebusd-esp. > > in order to make sure the adapter itslef is able to...
there is no pin 9 or 10 on J12
since the synology is not the fastest device, I'd recommend to increase the latency value to 40 ms, i.e. use "--latency\=40" instead of "--latency\=8000" (the factor 1000 is not needed...