John
John
`--configpath=/etc/ebusd/22102.csv` funktioniert so sicher nicht, es wird hier ein Verzeichnis erwartet. Also wenn dann `--configpath=/etc/ebusd`
ist das poti auch gut genug eingestellt? ohne die richtige Einstellung kannst es ziemlich vergessen
da müsst ihr shcon selbst Hand anlegen und rausfinden, was in den messages drin steht. der Adapter 3 kann kein UDP, nur TCP und das eben enhanced oder nicht.
[hier](https://github.com/john30/ebusd/wiki/HowTos)
this is already supported up to the point where ebusd has to answer to queries from another participant. here the new constant value fields come in handy but variables and...
the idea of the variables is somewhat different, i.e. the definition in CSV would allow for using "=$variable" instead of a constant value as referred to by #39, and then...
add option to define file for own config
the MQTT integration settings are capable of adjusting poll priority of messages matching filter criteria, see [here](https://github.com/john30/ebusd/blob/master/contrib/etc/ebusd/mqtt-integration.cfg) and [here](https://github.com/john30/ebusd/wiki/MQTT-integration)
it is a priority value, not a factor to be applied on the interval.
the idea behind it is that the bus is penetrated only once every pollinterval seconds. so every pollinterval seconds another message gets picked from the priority queue of messages to...