Jonas Savimbi

When I use the manual wall switches on my Dual R3, I get one line once the motion stops (consistent with the behaviour on the eWeLink app). But only with...

Just to add that with the latest updates from HA, I am now unable to reach the debug page for the tool. Any other way to reach there @AlexxIT ?...

Further debugging, appears that if using "cloud" mode, everything works. Need to debug further when using "local". Closing this. Thanks for the support @AlexxIT .

@AlexxIT I have the same problem with all v3.x versions. I cannot set the position of the covers even. Everything works fine on v2.x. Is there any way I could...

If I'd have to guess: https://github.com/AlexxIT/SonoffLAN/blob/86de124c093cb8e3ebad5d2feea12cdda4c6b215/custom_components/sonoff/cover.py#L113 Should be `currLocation` and not `location`. If so, later on I could test and open a PR :)

But now I am confused, as I updated again to this version, and everything is working properly. The only thing I changed, was start HA with the firewall open (allowing...

Actually, noted that when using the physical switches, the UI wasn't updating. I've opened a PR which hopefully helps. https://github.com/AlexxIT/SonoffLAN/pull/910

Don't mean to hijack, but I've been tinkering with my HP here: https://github.com/crazyfacka/gree_hp

I have the same problem as @tonimg87 . The functionality mapping is different, and from the communication protocol, I cannot directly understand that it's with a Heat Pump, and not...

@tonimg87 as to don't further hijack this thread, we can continue this conversation on the other repo. I know that issue. That only happens if you have any other application...