Johannes

I solved this by putting the ESP32 inside (luckily I have 4 wires + a "shielding" wire to my doorbell) - between the Fingerprint Reader and the ESP is some...

Not sure how a page like this should look like - there is the detail page with temperature and brightness control. For stuff like monition sensors you would have a...

Hey, there is a list of entities for each page that is used to get state updates and re-render the page if they have changed in homeassistant. - However this...

Please post your config

This should work - not sure how you added the addtitional entities: ```yaml nspanel-bedroom-3: module: nspanel-lovelace-ui class: NsPanelLovelaceUIManager config: panelRecvTopic: "tasmota/sonoff/nspanel_bedroom_3/tele/RESULT" panelSendTopic: "tasmota/sonoff/nspanel_bedroom_3/cmnd/CustomSend" model: eu locale: "nl_BE" #dateFormatBabel: "EE d...

Didn't think about the 4x2 layout - are the additonal entities on the 4x2 layout updateing?

can you send some logs from appdaemon? - after startup (section with the entities that have been registered for callbacks) - and the logs during this issue (open page, change...

renderCurrentPage is acually not used by the appdaemon backend - rerendering is triggerd by the button's that are switching the page Callbacks are processed here: https://github.com/joBr99/nspanel-lovelace-ui/blob/a873e3e29e2f8241b489bc8596af1f7f97989fb8/apps/nspanel-lovelace-ui/luibackend/controller.py#L160 Can you uncomment the...

Can you try to comment thoose 4 lines? They are an cooldown so you are not getting too many updates - might be an issue in your case.

I would like to see the messages send to the panel in the log. Can you add this to your config? (Same level as panelRecvTopic, locale or model) `quiet: False`