Joe Morris

Issues trying to work with Elgato Stream Deck MK

1

I have tried many things to get the Elgato StreamDeck working. I am running Ubuntu server 20.04 on a Pi 3B+. The first thing I did was to create a...

Error stopping node: Close timed out - Again

3

This is an issue once again with Node-red 2.x Here is a post on the NR forms discussing the issue. [(https://discourse.nodered.org/t/error-stopping-node-close-timed-out-mqtt-nodes/52830/5)]

Is this repo going to be maintained? It looks like the last updates were 3 years ago.

unifiWS stability issue

4

if I deploy a nodeWS and then subsequently change the config node, unifiWS does not recognize the change and goes into a reconnect mode roughly every 2-3 seconds. Twice now...

Secondary edit of stack config not saving

1

When I re-edit a stack config and deploy it, the new edit works when deployed but the edit itself is not saved for future deployments. It is the same result...

No MQTT messages from CX410 Camera

3

I am really looking forward to getting this to work. I might have something incorrect in my setup. My files are below. Also, I do have https, rtsp, and onvif...

Aedes broker does not respond to localhost or 127.0.0.1 after a node-red project is pulled down from github

3

I manage node-red replicated projects through github. When I push and pull a node-red instance that contains the Aedes broker node, the node will not respond to MQTT nodes that...

Get device's sending ip address

1

I have been looking at the publish output of the node and cannot locate the sending ip address. Is this something that I can get? I wish to, based on...