Jerry

This still seems to be an issue, nextcloud 28.0.2.5

I got this issue with TrelloJson and TrelloApi, this change fixed it for TrelloApi (I didn't bother trying TrelloJson after going to the trouble of setting up trelloapi thinking that...

I recently installed nintype again to try it out, and the algorithm seems pretty straightforward. Instead of trying to piece together a word based on one swipe motion after the...

I don't have much free time to really look into this issue or work on a pull request, but these might be good spots to start looking: - https://github.com/florisboard/florisboard/blob/master/app/src/main/kotlin/dev/patrickgold/florisboard/ime/keyboard/KeyboardManager.kt -...

I'm having this problem as well, using serial for communication between the halves. I don't even get the oled_init warning. I have the v1.1 pcb, what do you mean by...

That's what i was worried about, i missed the part about soldering the jumpers until after the micro was soldered in. Given that, if I got a new oled and...

I flipped them and the OLED still works! The pimoroni trackball I had connected works too, neither seem to have been fried! Thanks for the help!

Came across this which seems relevant: https://sourceforge.net/projects/flowkeyboard/ https://play.google.com/store/apps/details?id=com.enchantedcode.flow

I'm getting this issue too, had to manually set wireguard obfuscation on and even then it would struggle to connect on certain networks (or would say it's connected, but no...

``` ~ $ ip -6 route 2001:db8:abcd:1234::/64 dev eth0 proto ra metric 100 expires 86389sec pref medium fc00:bbbb:bbbb:bb01::1 dev wg0-mullvad proto static metric 1024 pref medium fc00:bbbb:bbbb:bb01:d::81db dev wg0-mullvad proto...