jlmxyz
jlmxyz
any improvement regarding the cpu usage? really, it's ages that it's working, should be merged... without cpu usage reduction what the point of having a blast fast GUI when even...
Hi, On my laptop, for the demo window, on master branch from ocornut, synced today (321b84f01fbf3f64db6dbb53deb707d150ce30dc) I get about 10-12% CPU usage glfw + opengl3 example; the issue is that...
Hi, I've the same problem here what I've done 1. dip switch are all on, using LCD I do the calibration, the slider move 1cm forward then 1cm backward 2....
I managed to make it work somehow... > My magnet is 0.3mm from the sensor and it seems to work fine. I also tried 1.7mm and 2.3mm and seemed the...
> > > Follow up comment from BTT > hello > Generally speaking, the motherboard firmware is set to 16 subdivisions. If the motor is 1.8 degrees, the number of...
> What an interesting reply @jlmxyz I'm doing a complete rewrite, which I'm going to be finishing soon. I'm hoping to finish over this weekend. My version is not only...
> > > > > What an interesting reply @jlmxyz I'm doing a complete rewrite, which I'm going to be finishing soon. I'm hoping to finish over this weekend. My...
any news about the new firmware? I bought a programmer so I should be able to test it... BR
I've a question since you're working on the firmware, how is the communication DIR/STEP/EN handled? according to the doc, the timings have to be quite bigs, MKS closed loop model...
> > > the dip logic is inverted and BTT is too incompetent to update their source or manuals. Dip 1 On is to Calibrate Dip 2 on is Closed...