jk987
jk987
Also pins A0-A3 seem to be swapped. More precisely, in schematics they are correct but on the board they are swapped.
Well, I was also reading it but I haven't noticed any useful difference between soft power-down and hard power-down. (?) And going to hard power-down is quite easy, I just...
I'll answer to myself. I started scope and it seems that my crystal+MFRC seems to be woken up in less than 300 microseconds.
Well, I'm not testing soft power down. Because like I said, I don't understand what is on or off in this mode. In hard power-down (RST connected to GND) I...
@KarlSix I'm quite interested how the `mfrc522.PCD_ReducedPowerCardDetection` looks like. Is it please possible to find it somewhere?
@KarlSix Karl, I still would like to ask you to show us your mfrc522.PCD_ReducedPowerCardDetection. Please, is it possible or is it some secret?
@akellai Great job. I tried your idea with soft power down and extracting only important lines from MFRC522::PCD_CommunicateWithPICC() and it works fine! My detection cycle takes now cca 3.2 ms....
@akellai I think this will not be the problem. I'm having TReloadReg 0x0190 and I'm swapping only TPrescalerReg values 0x05 (when testing card) and 0xA9 (original value when reading and...
@DimaVIII @akellai fastDetect1 and fastDetect2 are almost the same. My opinion is that akellai has his fastDetect3 optimized to the edge and it can easilly happen that with other tags...
I have the same warning and everyting seems to work.