jj-uk

@jamesturton I'm still seeing some flickering here. Running 51.6. Ledtable is off, dimmer range is 10,100. Leading edge is 0 but the issue also exists on 1. Setting the bulb...

I've bought new bulbs to test with. They are Philips bulbs. They still flicker at between 50 and 80%. Tasmota is rejecting "warmup_brightness" as a command in the console.

OK thanks. I'll try the command at a later time. The bulbs are "Philips Master 6W LEDluster E14 SES Golf Ball DimTone" - https://www.ledbulbs.co.uk/products/philips-6w-led-e14-ses-golf-ball-very-warm-white-dimmable-45358200 I have 5 in parallel.

Is this what you guys are running? https://github.com/jamesturton/shelly-dimmer-stm32/releases/tag/v51.5

Ah ok. I'm not that familiar with github. I can only find "Releases". What needs clicking to get to archives?

> @mike-grant , > > Thanks for your wonderful instructions. > > If you're free pls help to update the following in **BOLD**. Thanks. > > https://github.com/mike-grant/haaska/wiki/Setting-up-haaska > > Setting...

+1 on this. I have setup the default layout the way I like it. I'd now like to duplicate that to 2 alt osd screens, then turn off stuff on...

Yes. Dump to a text file, and change the screen ID then paste back in the terminal.

+1, saves having to go the cli and use the version command to find out what hardware and software my old models are running.

I think it is required. Programmers use regex, everyone else sees it as voodoo. 🤣