Jiayao Meng

Dear @jjonkman, Many thanks for your reply! It turns out to be the convergence issue. The big difference still exists with the modification of `GenDOF` = False and `AFAeroMod` =...

Dear @jjonkman, I tried the two changes independently and found that only reducing `dt` to 0.0005s still doesn't work, whereas the change of`NumCrctn`=1 is effective even with `dt`=0.0015s. That's interesting....

Dear @jjonkman, I just wanted to follow up on the possible BeamDyn-AeroDyn coupling issue that we discussed earlier. I came across the large discrepancy between ElastoDyn and BeamDyn again, even...

Dear @jjonkman, Many thanks for your reply! The only change I made is to use a 6*6 linear stiffness matrix in HydroDyn to represent the moorings' elasticity. I tinkered with...

Dear @jjonkman, The two models match very well after switching `UAMod` to 4. Does this indicate some bug in the 1-state stall model? Many Thanks, Jiayao 

Thanks for the information,@ptrbortolotti! However, it still puzzles me why UAMod=6 appears to work fine with BeamDyn for the 8m/s case.