jhall0326

Actually that is what I am running. I have the RPi 4B and the 20200606 release wouldn't run on this board.

Log Files Attached: [motion.log](https://github.com/motioneye-project/motioneyeos/files/8707900/motion.log) [dmesg.log](https://github.com/motioneye-project/motioneyeos/files/8707902/dmesg.log) [boot.log](https://github.com/motioneye-project/motioneyeos/files/8707904/boot.log) [messages.log](https://github.com/motioneye-project/motioneyeos/files/8707905/messages.log) [motioneye.log](https://github.com/motioneye-project/motioneyeos/files/8707906/motioneye.log)

starbasessd - Thanks a ton for your assistance with this issue. I have no manual settings at all. MeyeOS detects the IMX219 and sets it up as a MMAL camera...

That certainly sounds like what I'm dealing with. Unsupported camera for the driver version. I was very encouraged when I saw vcgencmd get_camera report detected=1 supported=1 but i'm not certain...

Also, when I delete and recreate the camera, I am now seeing under Camera Type=local V4L2 Camera, when I click the dropdown for camera, there is an entry at the...

I finally got the logs to clear using the --force switch. I'm loading the RPi OS and will let you know when it is done. By the way, the camera...

After setting to 1280X720 then reboot. New logs. [motion (9).log](https://github.com/motioneye-project/motioneyeos/files/8733781/motion.9.log) [dmesg (8).log](https://github.com/motioneye-project/motioneyeos/files/8733782/dmesg.8.log) [boot (5).log](https://github.com/motioneye-project/motioneyeos/files/8733783/boot.5.log) [messages (5).log](https://github.com/motioneye-project/motioneyeos/files/8733784/messages.5.log) [motioneye (5).log](https://github.com/motioneye-project/motioneyeos/files/8733785/motioneye.5.log)

It took me a while to find it and download it. Getting ready to create the img now.

Okay! It's booted and camera enabled. Now what?

pi@raspberrypi:~ $ raspivid -bash: raspivid: command not found