Jordi Gauchía

Start address

2

It's possible to add a command in CLI to indicate start address of EEPROM writing?

NEXTION HMI - NexVar issues

12

Hi, First of all, good job with your firmware compatibility with NEXTION HMI! (and sorry for my English). I'm testing this feature but I've some issues reading variable values like...

From 4.2.84 to 4.2.85 Issue compiling with same Configuration_overall _sketch/module/MK_Main.cpp: In function 'void gcode_G28()': sketch/module/MK_Main.cpp:3842:28: error: 'class Planner' has no member named 'max_planner' feedrate = planner.max_planner.acceleration_units_per_sq_second[Z_AXIS] \* 60; // feedrate...

Hi, I'm implementing a simple LCD info output for the freqmeter. If you're interested, please let me know

### Issue description When send M20 command , reset the printer showing this error: With cold hotend **Menu/Prepare/Move_Axis/ChanExrtuder_4.g/Exrtuder_4.g 3 Menu/Prepare/Move_Axis/Move E/ Menu/Prepare/Move_Axis/MoveMinus/Minus/ Error:Heating failed, heater stopped! Heater_ID: Error:Heating failed, heater...

Waypoints Management

3

## Summary Add the option to save/load waypoints in GPX format.

## Summary I am seeking assistance with reviewing, optimizing, and cleaning up the code for my project on GitHub. If you could take a moment to review the code and...

Slow GPS response

3

## Overview Slow GPS response ## Details ## Log output `

## Summary Add Device Info in settings screen

OTA Upgrade

2

Add firmware upgrade via OTA