jeybee74
jeybee74
Hi, what kind of RS485-ethernet device do you use? I have tried 3 different types from Waveshare and I get a lot of timeouts in my logs. The intergration works...
Did you get it to work?
Did you get it to work?
Oh, what a bummer.Maybe you could bring it to Sunsynk so they could try to update it or something, but maybe it's risky like you said.I have a Sunsynk 3phase...
RS485 is connected using the red cat6 cable 
Thank you for the suggestion :) to connect to the BMS port, However, I get the same issue, with the connection to the BMS port, pinout is the same, pin...
> Not 100% sure, but as I understand this splitter is just used for those models that have this CAN and RS485 port combined. I did not recieve any data...
> From your logs you successfully connect & read the initial sensors (including serial) from the inverter > > ``` > 12:24:01 INFO Connecting to serial-tcp://192.168.0.33:4196 > 12:24:01 INFO PyModbus...
Hi guys, Here is an update of my timeout issues! I have now bought a Waveshare USB-to-RS485 device and tested it, all timeout issues are gone (at least for the...
> I made my own Wifi/LAN RS485 gateway device from an ESP32 with LAB and an RS485 breakout module. > > [https://github.com/kellerza/sunsynk/discussions/324#discussion-7043693](url) > > It has been running pretty reliably...