jeromeli002

smt32 F103 failed to flash qmk

4

https://github.com/rogerclarkmelbourne/STM32duino-bootloader/blob/master/bootloader_only_binaries/generic_boot20_pc13.bin    The first time I used stm32f103, I flashed the bootloader provided in qmk, and the device displayed maple003, but I couldn't flash the qmk firmware. Is...

Is there any OLED example of stm32 mcu, I have no idea to use smt32f401 to drive OLED

2

Is there any OLED example of stm32 mcu, I have no idea to use smt32f401 to drive OLED

qmk支持模拟surface dial吗Qmk zhīchí mónǐ surface dial ma, 21 / 5,000 翻译结果 Does qmk support simulating surface dial?

6

qmk支持模拟surface dial吗，看见有人实现了不知道qmk有没有原生支持？有键盘支持的开源参考吗 Does qmk support simulating surface dial? I saw that someone has implemented it. I wonder if qmk has native support? Is there an open source reference for keyboard...

Can the trigger resistance between col and row be reduced? For example, now it is less than 10KΩ and nine triggers, and I want it to trigger when it is less than 5KΩ. Can I modify the code to implement it or can I only change the hardware? I want to use the joystick as an ordinary four-way switch. Now it will always be in the trigger state. Another open source project can be used directly and cannot be always triggered.

1

Can the trigger resistance between col and row be reduced? For example, now it is less than 10KΩ and nine triggers, and I want it to trigger when it is...

Can't the two IOs of B2 and A9 of the STM32F401 development board be used on the qmk, and cannot be used in the matrix. Is there any special usage or where do I need to set it up separately?

2

Can't the two IOs of B2 and A9 of the STM32F401 development board be used on the qmk, and cannot be used in the matrix. Is there any special usage...

The keyboard name cannot be set to F12, the compilation can pass normally, but the computer recognizes it as a string of messy letters

2

The keyboard name cannot be set to F12, the compilation can pass normally, but the computer recognizes it as a string of messy letters 键盘名字不能设置F12，编译能正常通过，但是电脑识别出来是一串乱七八糟的字母

Compile the firmware like this? makeXXX can not change the firmware 

バイアルのファームウェアを提供していただけますか? Via は json ファイルをインポートする必要がありますが、バイアルはファイルをインポートする必要はありません。

多旋钮和radial没有开放的吗？ 看见新曾键盘HAL67 Rev.A支持多旋钮， 复制这个键盘来改加上RADIAL_CONTROLLER = yes编译出来旋钮完全不能用

用了这个后会出现google问题

1

用了这个后会出现问题 google的基本上有会有 比如gmail的设置，google网盘上传，等 这些按钮点击没有反应，停用此脚本后恢复正常