Jeremy Poulter comments

Results 220 comments of


                                            Jeremy Poulter

RFID "hardware required" note

I will have a look to see how easy it is to detect if the hardware is installed.

The delay timer does not work correctly when you set the time via a browser or manually

Is this not the issue raised in #386?

max_current in claim or override not taken into account if set before starting charge

@KipK This will behave differently over HTTP vs MQTT I believe due to the issues you point out in #376, but I am not totally sure I get what you...

max_current in claim or override not taken into account if set before starting charge

The current shaper should really be using the `max_current` as well so it can interoperate with the solar PV for example. Maybe the `max_current` should behave slightly differently to the...

max_current in claim or override not taken into account if set before starting charge

@KipK thanks, can you also let me know the `/status` and `/claims/target` ?

Delete or Update simulator

This has been on my mental list for a while, thanks for raising a ticket

Implement auto config of emonTx CM FW to enable serial mode

I was thinking about this. the biggest problem is you need a way for the EmonESP to reboot the EmonTX, so either an additional command on the EmonTx firmware, and/or...

NTP time with time zone and dst

Good work, yes please create a PR

feature/lora: Enable LoraWAN supported hardware

Great to see this revived, I will review and see if I can get the required hardware to test.

feature/lora: Enable LoraWAN supported hardware

The Heltec boards look to be out of stock, would something like this work: http://www.lilygo.cn/prod_view.aspx?TypeId=50060&Id=1270&FId=t3:50060:3