jensweimann

Hi, I installed the new version and sniffed the data: 14:28:16 MQT: tele/sonoffRf1/RESULT = {"RfRaw":{"Data":"AAA606012208AE2F0B55"}} 14:29:13 MQT: tele/sonoffRf1/RESULT = {"RfRaw":{"Data":"AAA606012208AE2F0B55"}} 14:30:10 MQT: tele/sonoffRf1/RESULT = {"RfRaw":{"Data":"AAA606012208AE2F0B55"}} 14:31:07 MQT: tele/sonoffRf1/RESULT = {"RfRaw":{"Data":"AAA606012208AE2F0B55"}}...

Per this cpp file the packet size should be 37 Bits: https://github.com/dgomes/homeGW/blob/master/digoo.cpp

> This is not correct. You have 36 bits. 40 bits are 5 bytes - 4 bits. So 4.5 bytes. And the number should start with a leading 0. I...

> finally got a new unit! going to try get back onto working on this. I see previous version isnt working? Hi robmarkoski, did you managed to achieve any progress?

Now that this feature is in the release of Home Assistant 2024.7.3 I tried it and at first, the night latch feature didn't show up. In the debug logs was...

Yes, this will do. I have a similiar one working on the esphome config.

Personally on my setup the slider is controlled by home assistant automation, based on the delta between current temperature and target temperature. You can decide that way yourself what the...

> @jensweimann what's the percentage of your burner during this minimal period? (I use bbqees's hardware to query boiler parameters). I don't know about this hardware. I just set the...

> Does your heater have a small glass window you can peek in to see the gas burning? Do yo see the flame sizes? How big are they at your...

Thank you very much for the work @Strooom! I built the project recently and have a couple of spare pcbs that I ordered from pcbway. I'll send them inside germany...