jemarro12
jemarro12
I could help in testing or anything I could help... Any testing firmware which boots up??
@Ralim I think what you need is all the wiring to the MCU, which pin is connected to which component? I can do that reverse engineering over a Si012 Pro...
I´ve made some progress: As said in a previous response Sequre Si012 Pro V1.5 (pink PCB) uses a CKS32F103C8T6. This iron is compatbile with 2 different kind of tips T12...
Components are really small, I"m trying my best with my 10bucks usb microscope. I"m almost certain they use separate PWM signals, one for each MOSFET. PB8 gates first MOSFET while...
After exchanging several emails with Sequre, they are asking if both Ralim (the project owner) and I would be willing to sign an NDA in order to share the schematics...
@Ralim after several mails and corrections Sequre team finally signed the NDA, i´ve forwarded it to you for your approval. Last week i´ve tried to reverse on my own the...
@Ralim I forwarded it to you yesterday. You must have received an email from [email protected] yesterday at 14:18h. Attached is a PDF signed by sequre. If it has not been...
After several mails back and forth with Sequre finally we have Si012 Pro schematics. @Ralim if you need a copy i can send to you. CKS32F103C8T6 pinout: PB9 - T13_PWM...
@Ralim if you see it convinient i can create new PR to provide this info
A Pull Request ( #2124 ) is opened with the first build working. I appreciate if you can test it and share feedback in the PR. All is working as...