Jeff Eberl

CNC.js raspberry pi image

20

Hi, I'm working on incorporating CNC.js into a raspberry pi image. It's very much in alpha right now, but I've had good results so far, as have two testers. It's...

Using prismatic joints, with hard limits

13

I'm trying to create my own model, and it requires modeling linear actuators. I'm assuming a prismatic joint is the right joint to use. I loaded it using an SDF...

Feature requests

7

Great tool. In case you were looking for some things to make it better, here are two thoughts I had while using it: 1) cli_repl: I don't like using a...

Thank you so much for collecting this info together. I usually use a folder structure for my gcode files. For whatever reason, the files and thumbnails get stacked like this:...

more configs

7

We need to make some more configs: - 3DP Rambo? - CNC Ramps?

Check that all the readmes make sense

5

We just need to go through each config file and make sure the readmes are correct and complete. I added this step a bit late, and I am sure I...

skr 1.3 tmc has wrong steps/mm

1

https://forum.v1engineering.com/t/wrong-double-measurements/25291/4?u=jeffeb3 Something probably got confused since the skr 1.3 firmware was originally for 8825s

Better feedback from the scripts.

1

We need to add confirmation that the scripts are finding what we need them to change. Things like Marlin changing the name of a parameter would be obvious then, because...

I think two major parts: 1. A quick page about flipping the cables. 2. A page showing the general layout of the menus. Basically jogging, set home offsets, print from...

get_card_name index out of range (using previous card_index from config file)

1

I plugged in a USB sound card, set the mixer on volti to work with it (card_index 2). Then I unplugged it, rebooted, and volti wouldn't start. This is the...