Jeff Clay

@Seminole81 > Solved. E0 does not work on (x2) board. Remade firmware with extruder set to E1 and works I'm new to this and looking at compiling for my first...

@chabad360 are you working on support for this device without the half press feature? if so, do you need any help testing or anything? I'm running Fedora 32 and can...

I hope your RC instance isn't exposed to the internet. Version 3.x has some severe vulnerabilities. That said, are you downloading the pre-built bundle from https://releases.rocket.chat/{version}/download or are you downloading...

@Gabe88def the first link wasn't valid unless you replaced '{version]' with the version your downloading. The second link is more difficult to build than the first, I advise only using...

@Gabe88def No, unfortunately there are many db migrations between major versions. You have to iterate through each minor version (3.x.x, 4.x.x, etc.) all the way up. There are 187 versions...

The log is cut off, I can't tell what's going on. Please show the full log from when you start the RC service until it dies. You can try using...

You're struggling because you're not looking at full logs. You're just posting small snippits of the full picture. Follow these instructions: 1. Open an SSH session to the server. 2....

What is the motivation behind this? It seems like a lot of people are going to upgrade and find lots of missing/broken states. Shouldn't these modules, etc. have been flagged...

> A question for everyone: > > What additional communication channels (besides the SEP process, Open Hour meetings, blog posts, Slack/Discord community. Github issues) the Salt Core team should have...

Why is this touching EasyInstall.py and stating that it's an empty file?