jeevesh326

Thanks for the automated suggestions 🙏 For this board, UART5 is intentionally RX-only — it’s used exclusively for SBUS/CRSF input. There is no TX pad on the PCB, and assigning...

> Please note that new targets must follow the [INAV New Hardware Policy](https://github.com/iNavFlight/inav/blob/master/docs/policies/NEW_HARDWARE_POLICY.md) > > Have you been in contact with any developers? Thanks for the reminder about the INAV...

> > Thanks for the automated suggestions 🙏 For this board, UART5 is intentionally RX-only — it’s used exclusively for SBUS/CRSF input. There is no TX pad on the PCB,...

> OK, that's sounding pretty cool. It sounds like it is much different to the Omnibus F4 at this stage. So I would probably remove that association, as it just...

> merge label. But this is just to put that on hold @MrD-RC Can you please verify the pcb New version   Older version    

> I don't know what you mean by verify the PCB. I can look at it and offer some advice on the layout. But not much more than that. It...

you can check the user manual for all the details @MrD-RC [end_manual.pdf](https://github.com/user-attachments/files/23304950/end_manual.pdf)