jeanpaul79

Hello, I have the same problem. If switch is on, all the values are at 0. If switch is off I only get the voltage value. I did the calibration...

Hello, Yes on the "sensors" page. But in the status all the values (power, current, voltage) are at 0. If I turn the switch off, only voltage is displayed. My...

Ok thank you. It is a POW When OFF it behaves at it should but when ON it displays only 0 everywhere.

Hello, here are the results (V1.13.1) With relay OFF > [736624] [SENSOR] HLW8012 @ GPIO(5,14,13) - current: 0.000A > [736628] [SENSOR] HLW8012 @ GPIO(5,14,13) - voltage: 218V > [736630] [SENSOR]...

Hello, with 1.12.4 it's working fine. There're some gliches, sometimes it reads 0 but otherwise it's OK. with 1.12.5 it doesn't work. It shows voltage only when the switch is...