jcdr428
jcdr428
For the record: TSMuxer calculates the ATS (Arrival Time Stamps) of each M2TS packet by simply dividing the time between two consecutive frames/DTS by the number of packets. This is...
When selecting a multiangled mpls, tsMuxer currently automatically selects the default tracks i.e. no possibility to select alternative angles. tsMuxer should detect whether the selected mpls is multiangled, in which...
As per BD-Rom Part 3 Standards, the maximum reading rate of the BDAV MPEG-2 Transport Stream is 48Mbps for HD, 109 mbps for default UHD (cf. http://www.hughsnews.ca/faqs/authoritative-blu-ray-disc-bd-faq/8-recording-and-reading-speed) This means that...
When AVC or HEVC streams are muxed in e.g. mp4 or mkv, the Access Unit Delimiter nals are removed. tsMuxer already includes adding the missing AUD nals when muxing AVC...
Cf. https://forum.doom9.org/showthread.php?p=1883574#post1883574 : "Another very nice feature to add, long ago Roman commented that he was going to implement but unfortunately did not it finally, is to keep the SubPath...
For M2TS, the packet is 192 bytes = 4 bytes extra-header then 188 bytes. For each packet, DVB Inspector shows the 192 bytes from the sync_byte 0x47, therefore it ignores...