Joe

This is an old one, but still a problem. Here's my use case if it helps: I run Duplicati in a container, and use it to back up other containers....

Hello, I'm wondering if the `generic` service was documented at some point? it's pretty sparse on the docs section of the website, and nothing of interest in the `generic.md`. I'm...

@linuxguy123 @guysoft Gents, I'm wondering if you have made any headway in the discussion of building a proper open source replacement? I too have had the same concerns, and have...

I'm here to ask the same or similar question: For those using Swarm mode, would it be possible to detect that with trimming the container name to the left of...

+1 this. While I can build out an automation by watching the `onDayDreamStart` and `onDayDreamStop` topics, it'd sure be great if these came in via the FKB integration as sensors!

I tried adding the preceding `/` to each of the remote control endpoints, and verified the `ON` slider is selected, still same symptoms. I'm experiencing another issue that I now...

I don't find any v4.0 update, most current I find is 3.6r3; how can I upgrade?

Thanks, I updated to `BrewPiLess.v4.0a1.oled.newui.4m2m.bin` successfully, and this resolved the UI issues described above. Unfortunately the MQTT remote control issues still persist; testing with every combination of prefixed `/` and...

I'm using mosquitto. I run it as a container, working quite well for a few other IoT services. I'm running it without any auth requirements or TLS, so there shouldnt...

+1 for the `BrewPiLess.v4.0a2.oled.newui.4m2m.bin` having fixed the described workarounds for setting the fridge setpoints, thanks!! Updating mode or setpoints via MQTT issue still persists. @shambolic94 any chance you use MQTT,...