Jay Garcia

FamiTracker would be dog slow on a Pi (even 4). To port to linux would require an entire rewrite of FamiTracker's UI layer (unless i'm mistaking). Have you folks tried...

Hi @Srihari88 can you try again? Perhaps this was an issue w/ the NPM outage of 5/14? https://status.npmjs.org/history 

Did you add the file to the project and make sure that it's being copied to your app in development?

@gguy825 , have you performed the following? https://github.com/hzeller/rpi-rgb-led-matrix#cpu-use

Cron is nearly 50 years old, loads of examples, tutorials online. https://crontab.guru/examples.html You can't use sudo because it's an interactive program that requires password to escalate privileges, so you'll need...

Could it be that your paths are not correct? Loading time for a program is not an issue for Cron.

> You essentially need to read the datasheet of your SoC and re-implement the interface provided by [gpio.h](https://github.com/hzeller/rpi-rgb-led-matrix/blob/master/lib/gpio.h). If your SoC has a way to memory map GPIO pins (most...

@SebastienLBA please close out this issue when you have a moment :).

@chrisle , thank you so much for the updates to this library via your Fork. I tried your fork's `main` branch and am happy to share that it works with...

Thank you @OtherCrashOverride & @rickyzhang82 for keeping this discussion public. I've been reviewing the current state of `go` and have been testing a few things as there are a ton...