jansmets
jansmets
and being able to specific a StorageClass for a PVC for those who want to use persistency might be interesting too.
You can use docker export (or was it save, i always mix these up) to save the image, with all it's layers, to a tar file. If you then extract...
the image is not yet available.
Others are in the same boat - if you would have a workaround please share it. Thanks
Would be useful indeed.
> @jansmets, do you want to fix the documentation? @zhucan can PTAL ? I'd think it's the other way around. It"s a gateway setting, so i'd be tempted to say...
dead in the water ... have been waiting almost 3 months now for a new release.
Works indeed!
For reference, curl -d "optType=ReadRealTimeData&pwd=XXX" -X POST http://192.168.0.191 {"sn":"XXXX","ver":"3.006.04","type":16,"Data":[2271,2271,2276,4,4,8,33,21,0,4782,2629,0,1,1,0,75,30,0,5002,5002,5001,2,296,0,1,8000,24,25,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,65142,65535,1591,0,13532,0,56,0,1,7,6,0,12468,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"Information":[8.000,16,"MC20XXXXXX",8,1.18,0.00,1.15,1.01,0.00,1]} curl -d "optType=ReadSetData&pwd=XXXXX" -X POST http://192.168.0.191 [26,0,0,25600,25700,0,30000,60000,0,0,0,0,0,0,0,0,0,2415,2300,118,0,0,115,101,11047,7946,5644,0,0,1,2645,2875,2875,1955,920,920,1,2530,5150,5200,4750,4700,0,0,2760,1150,60,1,5020,90,1,4980,100,1,900,0,10,10,0,100,2014,0,1,0,1,0,0,0,150,10,300,150,500,10,500,10,1,0,3000,5010,0,2530,2553,2576,2576,0,200,50,2139,2231,2369,2461,23134,200,500,800,1000,1,0,1,5010,0,50,4985,0,50,60,1000,500,0,0,435,0,0,65101,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0] eg, field 0 is the 'safety' setting for the inverter, field 7 is an...