janjos0

@martin-ger Thanks for the tip, it works. @jbatx Yes I did, like I wrote it works. To get it working I changed the ap_ip of the second ESP32 NAT router....

@muhammad 1. Connect using MicroUSB cable the ESP32 board to your computer. 2. If a Windows machine, check Ports(COM&LPT) in "Device Manager" for your ESP32 COMx port, where x should...

@jul-nc I did not try using same SSID on at least two of them and unfortunately I can not try it for the moment. Mine had SSID's with only different...

Hi Jakub, Thanks for considering porting your project also to the F303RC. I thought the F303RE bin would not work because of some peripheral configuration, did not expect the problem...

Hi Jakub, I understood the RAM size problem. After reading again the documentation, more specifically the limits table, I see now that you squeezed every byte out of each MCU...