janeksz

through experimentation found the problem, but I am unable to solve it: when I change in my /etc/6lbr/6lbr.conf from DEV_ETH=wlan0 to DEV_ETH=eth0 it works, but I need to work with...

following this link https://github.com/cetic/6lbr/issues/163 and this https://github.com/cetic/6lbr/wiki/6LBR-Interface-Configuration I am trying to setup "the routed interface mode" my config is: root@raspberrypi:~# cat /etc/6lbr/6lbr.conf #This file contains a default configuration for Raspberry...

@florian-popup , Thanks, appreciate it, however it doesn't solve my problem. My system is running well if I use ethernet interface. **I have a problem with wifi.** As your 6lbr.conf...

@florian-popup Thanks again. I have tried your suggestions (bridge over wlan0), but still no luck. I don't have NetworkManager on my Raspberry Pi as it doesn't come with Raspbian OS...

@florian-popup I understand, that you don't have it working using wlan0, correct? It doesn't work for me on both RPi2 (using USB wifi dongle) and RPi3 (using built-in wifi) both...

@laurentderu Thanks for helping, much appreciate it. I"m trying to use solution 1 as suggested by you. My /etc/6lbr/6lbr.conf is: ####################################### _#This file contains a default configuration for Raspberry PI...

@laurentderu, thanks but I am still confused, so will need your advice step by step. I will try again on Monday, as I'm away for weekend. My main confusion is...

@laurentderu and my /etc/network/interfaces is: //------------------------------------ source-directory /etc/network/interfaces.d auto lo iface lo inet loopback iface eth0 inet manual allow-hotplug wlan0 iface wlan0 inet manual wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf //------------------------------------- root@raspberrypi:~# service 6lbr...

@laurentderu Thanks for helping Additional info - my nvm.dat is: root@raspberrypi:~# cat /var/log/6lbr.ip aaaa::212:4b00:7b5:cb00 root@raspberrypi:~# /usr/lib/6lbr/bin/nvm_tool --print /etc/6lbr/nvm.dat Reading nvm file '/etc/6lbr/nvm.dat' Channel : 25 PAN ID : abcd WSN...

@florian-popup , thanks for sharing //------------------------ my /etc/6lbr/6lbr.conf is same as yours root@raspberrypi:~# service 6lbr status ● 6lbr.service - LSB: 6LoWPAN Border Router Loaded: loaded (/etc/init.d/6lbr) Active: active (running) since...