jamesfxh
jamesfxh
> > https://github.com/zncs520/GPD-P2-MAX-Hackintosh > > OC6.5 BIG SUR > > 下午尝试直接用你的EFI代替之前的Clover引导，结果无限重启，检查了以下的设置，没有问题 image 加了-v后发现好像驱动有问题 image  > >  > > 这是什么原因呀? @zncs520 @andot 小马哥有没有试过呀 @andot 试试这个OC配置（v0.7.9 BigSur 11.6.5）[GPD_P2_MAX_OpenCore_0.7.9.zip](https://github.com/Azkali/GPD-P2-MAX-Hackintosh/files/8501459/GPD_P2_MAX_OpenCore_0.7.9.zip) 目前可以正常使用的功能（GPU+AGPM，CPU变频，电源管理及节能，触摸屏，USB，WIFI，BT，睡眠唤醒，电池状态，亮度/音量调节等），合盖睡眠有概率性正常！ 注：修改配置时注意VoodooI2C与VoodooI2CGoodix触摸屏kexts加载顺序！...
> > > **Computer:** GPD P2 Max (BIOS 0.29) > > > **VoodooI2C version:** 2.4.3 > > > **VoodooI2CGoodix version:** 0.3.1 > > > **macOS Version:** 10.15.5 19F101 > >...
I have the same issue,D-pad up/Down triggered automatically.but only for standard firmware, Also flash Arcade firmware test it's ok.Why is that?
> If you use the standard controller firmware, you need to wire up an analog stick and triggers, and run the calibration routines in the menu. You can't leave the...
> If you use the standard controller firmware, you need to wire up an analog stick and triggers, and run the calibration routines in the menu. You can't leave the...