Jeremy Soller comments

Results 302 comments of


                                            Jeremy Soller

oryp6,oryp7: Fan buzzing, clicking

Thanks for the information, and the sensors data. We'll take a look.

Internal System Tracking

Updates for 2020-02-26: - [x] @angerber - lemp9 - [x] @brs17 - galp4 - [x] @crawfxrd - galp3-c - [x] @jackpot51 - darp6 - [x] @leviport - darp5, darp5, lemp9...

Internal System Tracking

Updates for 2020-03-17: - [x] @brs17 - galp4 - [x] @crawfxrd - galp3-c - [ ] @jackpot51 - darp6 - [x] @jackpot51 - lemp9 - [ ] @leviport - darp5...

lemp9: Right click on touchpad

This is intentional and not related to EC firmware, as it only bridges traffic between the touchpad and CPU

lemp9: Left side of system heats up when AC adapter is plugged in

Solved by https://github.com/system76/ec/commit/ed0e662d60dfb19951cca8384326eca5fc117fbc Charging current was halved. System charges at 30W instead of the previous 60W and should not heat up as much while charging.

Actually disable lemp9 power button when off, AC disconnected, and lid closed

There is some glitching due to the electrical design. This commit takes care of that: https://github.com/system76/ec/pull/121/commits/954082178a093e46b62e7889747b42671801a6d0

Actually disable lemp9 power button when off, AC disconnected, and lid closed

lemp10 has the above firmware fix applied

Discussion: potential EC debugging/development tool

The only place where LPC is accessible on the galp4 motherboard is where the IT8587E is soldered. It would have to be removed and replaced with a pin compatible replacement....

tool: Long running `led_save` causes probe to fail

Is this specific to Launch or does it also happen on laptops?

Pop-os Beta For Raspberry Pi

We are still working on it