iwannabswiss

[3_sandify_files.zip](https://github.com/jeffeb3/sandify/files/8236596/3_sandify_files.zip) Wow! @jeffeb3, thanks for the quick response. Attached is a zip file, I got a warning that a .thr file isn't supported, with the three variations; two that work...

Here's also a couple screenshots to show what I'm getting. Export with the correct settings as .thr, it appears as the star should cover the whole table.  What...

> If you don't import anything, you just export something from sandify, and run it on your table. Does it draw the right size? If not, that's what I want...

Yes, I can and did. Upon the initial load, the png that's created makes it appear that it'll end up as a circle within the square and won't reach the...

Ok, so after running the track, it ends up as a circle inside of the square of the table and does not reach the corners.

Added additional commits to resolve errors

> Thank you for the driver! It needs to implement both INDI::LightBoxInterface and INDI::DustCapInterface. Please see [Flip Flat](https://github.com/indilib/indi/blob/45cbc790170941b48a867d87b667f506c70b00c2/drivers/auxiliary/flip_flat.h#L38) driver for an example. The problem with DustCapInterface though, is it that...

> Both DustCap and LightBox interfaces are now updated. Please check and let me know of any further issues. Will review and keep you posted. Thanks!

@knro Thanks for checking in. The changes have been made, and they appear to work in a 'virtual setting.' However, I’m not thrilled with the UI operations of the DustCapInterface...

@knro Even though Park and UnPark use ISR_1OFMANY, is there not a way to "reset" the buttons, so if Abort is selected, both buttons turn "off"?