ivanmara
ivanmara
I'm confirm this bug. deluge-1.3.15, GTK UI, Autoshutdown 1.4
> Problem 1: hotplug script reads bidirectional status from port, disregarding (not modifying) config file. Probably you can write your own that starts/stops init script as printer is plugged in....
> re permissions. The hotplug script does: Yes hotplug script set right permissions: ``` root@router:/etc/config$ ls -al /dev/usb/lp0 crw-rw---- 1 root lp 180, 0 Mar 29 19:44 /dev/usb/lp0 ``` But...
> Try setting the device permissions not as root but as user 660 (which ideally should be in passwd files as p910nd). You can check other p910nd issues for more...
> I also have a cousin of this printer, the 1018. Do you use a blob for this printer? Yes. I use blob from ubuntu: getweb 1020 Linux and windows...
> Please install `strace` to your device and see what specifically turns up. owrt 23.05.3 root case: All ok. process start and working: ``` root@router:~# strace -u root /usr/sbin/p910nd -d...
> At its simplest level, stop the privileged process, delete the /tmp/p9100d file. Then run p910nd unprivileged. It cannot start because it cannot write to that temp file. > >...
It was experimentally determined that the problem is in the xfce-theme-greybird theme. Sorry for disturbing. Topic can be closed.