Ignacio

The exact same thing happens to me with this device. https://www.koogeek.com/p-klsp1-1.html KLSP1-Smart plug It does not show the 3 sensors available. With the integration of LOCAL TUYA it works correctly.

HI @colinl Thanks for your prompt response. Debug256= (power in W range 0-2000W) It is the value that I want to enter into the PID in PV. Debug258= PID OUT...

Thanks @colinl I have now been able to open the complete debug. Do you think that the PID could respond well to even a remote SP that will be oscillating...

Thanks Colin, I think it's a good idea to start trying. So if I understood you wrong, we wouldn't use your PID node, right? Could you please, when you have...

Initially, the watt value to follow is obtained by mqtt every 5 seconds.

The PV value measured on the heating resistance clamp could be done at a maximum of 1 second.

Ohhhhh @colinl thank you very much for this great work. I'm still waiting for the Shelly 0-10V dimmer to arrive from Aliexpress. Looking forward to trying it....I have some questions....

I mean that the SP will change continuously depending on the solar radiation and the clouds, it is a measurement that is never stable. The SP will be the measure...

That is why I insist, the SP will change once per second (I told you 5sec, but I have managed to have an instantaneous power reading of up to 1sec)...

I don't think I'm able to explain myself with my bad English. Let's see if I can explain it now... Imagine that my SOLAR PANEL/Inverter is generating 1KW, I need...