Ignacio

I don't know if it's exactly the same problem, but with my IPC-HDW5241H-AS-PV camera, I correctly receive Crossline=Tripware, but I don't receive Crossregion=Intrusion. The controls work properly, from the tested...

I just flashed my Shelly EM and I have the same problem.   Output status 0: 17:17:52.021 CMD: status 0 17:17:52.028 MQT: stat/tasmota_shellyEM/STATUS = {"Status":{"Module":0,"DeviceName":"Shelly EM","FriendlyName":["Shelly EM"],"Topic":"tasmota_shellyEM","ButtonTopic":"0","Power":0,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0}} 17:17:52.061 MQT:...

I just realized that if I activate the relay output, I start to see measurements, but the device responds very slowly when moving through the WebUI menus, it must be...

Thanks for the suggestion it worked! I have tried this option and it works correctly, even if I turn the relay on or off, I always have the measurement. SetOption21...

Perfect!!! Now it's working, thank you very much for your help! 

If I activate the temperature, it marks a value that is not real and the RELAY is automatically deactivated when activated. It is not possible to calibrate the temperature more...

@barbudor Already a more in-depth topic, the ADE7953 has an important register to calibrate the Phase in the address 0x203 (PHCALx register) This is very important to correct the phaseshift...

More information PHCAL https://www.analog.com/media/en/technical-documentation/data-sheets/ADE7953.pdf 

It would also be very interesting to have a reading of the ANGLES registers. 

The exact same thing happens to me with this device. https://www.koogeek.com/p-klsp1-1.html KLSP1-Smart plug It does not show the 3 sensors available. With the integration of LOCAL TUYA it works correctly....