wdouglas1999
wdouglas1999
@s60sc Hi, I too have noticed this smearing and would like to know. Is this script working? How do I implement it? Or is this a question we should work...
I managed to get this to work for a single image, but how would I use this to control the exposure while streaming video? When I turn the auto exposure...
Thank you for the reply. When I change clkrc = 0x83 to clkrc = 0x81 or 0x80. I cannot see to get any picture or stream with Xclk = 20mhz....
@easeway I only seem to be able to receive images with CLKRC = 81 when XCLK = 5MHZ. Anything above 5MHZ i receive a blank page. When i use CLKRC...
@easeway This is what is have in the serial monitor for first 16 bytes with clkrc = 0x83 and pclk = 20MHZ. Clear image on the screen. for multipart/x-mixed-replace stream...
@BassilZaity I used working code from kodera2t. All connections are the same as the reference of igrr. https://github.com/kodera2t/esp32-cam-demo
@lss6378, Thank you for the reply. I am planning to store about twenty to thirty images. Hence , 20k * 20 ~ 400k. Do you think it’s possible with esp32?
@easeway I too am interested in increasing the frame rate at QVGA and would like to test what you have done on my test PCB. No long wires here so...
@easeway Hi, have you had any further success with increasing the frame rate? I am getting about 5 FPS at a resolution on 800 x 600. My XCLK is at...
Hi, I am no expert , but from what i can see from the data sheet of the OV7670 i do not see any jpeg output. This would imply that...