Florin C

This is a limitation of Tasmota, not of this project.

Thank you for pointing me in the right direction. I confirm that running those commands shows the default 'bai.308523.inc' being loaded. I can also read the pump state and flame...

I have already started looking into [your write-up here](https://github.com/john30/ebusd/discussions/1177) which seems like a great resource!

Running on WIN10 Kicad 7.0, tried both kibuzzard 1.3 and 1.4, labels I create are invisible, nothing shows up after clicking OK in the dialog box. 

@gregdavill "Ctrl +V" does not result in label appearing, forgot to mention but I already tried that. I have attached my log file. [kibuzzard.log](https://github.com/gregdavill/KiBuzzard/files/10839529/kibuzzard.log)

> I confirm, method described by @dzalf above works on my setup as well (WIN 10 PRO with Kicad 7.0)

I was trying to connect to my Serioux LD600LI UPS which shows up on lsusb as: `Bus 001 Device 005: ID 0001:0000` and discovered by the HA NUT Addon at...

@aquette I'm just running the latest addon version in HomeAssistant, I don't know how I could run the PR that you proposed and I can't run "nut-scanner -U" inside the...

@aquette I installed the SmartNUT add-on, everything worked first go with auto detect and default settings, UPS was detected, info started flowing into MQTT. However for the time being I...