Jeannot

In the meantime, would be possible to republish the last working version for aarch64 (for the docker image). https://github.com/mumble-voip/mumble-docker/issues/3 thanks a lot

I'm currently trying to get motioneyeos not to crash when streaming 24/7 rtsp to frigate. quite a challenge.

@starbasessd see https://github.com/ccrisan/motioneyeos/issues/2788#issuecomment-949455153 logs : no, crash with blurry hdmi output temps are low, voltage is default. i've overvoltage at 4 & 6 yes, fast network cam versions : 20200606,...

oh no, overclocking is out of question. it's all set to default voltage (no parameter in config.txt), and even went downclocking the cpu. btw, the very same raspi0 not connected...

I've had the same issue with and pinned it down to one raspi0w with motioneyeOS disconnecting another raspi0w with motioneyeos as well. it's been so since 2017 with all revisions...

@Cubytus : My issue was the IR cam for children monitoring at bedtime :D I've not found a suitable replacement yet. I do use outdoor dahua cams in RTSP, raspi0w...

@Cubytus Your specs are the same as mine! After much testing (all possible distros, stock clocks and downclocking, on 4 different rapi0w), the rtsp streaming always fails the same way....

thank you for the pointer. however it appears to not be possible to boot from a usb drive using the dwc2 driver. `dtoverlay=dwc2,dr_mode=host` also disabling fiq in config.txt isn't taken...

in case it helps, I encountered the same issue in an all dockerized environnent (tvheadend+jellyfin) on the same host. the issue was the jellyfin account in tvheadend which I filtered...

Representing link bandwidth is doable with arrow thickness. I'm generating json config file from other sources, making this change didn't take much time. The only thing missing would be asymetrical...