Pier-Yves Lessard

Hi, This issue is dedicated to DTC. If you have additional problems, creates new issues. There is no error message that says ``If didlist parameter or response contains a DID...

Hi, Look at the existing issues. You are Chinese aren't you? Many Chinese users all have the same timeout value of 50ms coming from the server. I got this problem...

Ok, do you mind sharing what is the ECU? I still wonder why so many people have this 50ms timeout. Unfortunately, windows doesn't offer a great thread resolution (16ms) and...

Yeah. If you ask 1ms, windows will sleep at least 16ms. You can achieve better timing with the Linux kernel though. It's the right sleep. You write, wait 16ms before...

Yes I know, there is something to be improved in the timing. But still, 50ms for a software in the user space is a bit tight. Do you mind telling...

Hi, I understand the issue you point out. It might be a little tricky to handle. Do you have the reference in the standard that suggest this is the right...

Thank you for your input. I will wait a feedback from you before looking into any solutions. Regards

Hi @MatinF Timing requirements would be defined by ISO-15765. For the specific interval you are requesting, I think there is no requirement. Only timeouts value if the delay is too...

Thanks for the clarification. So just to verify that I've understood this correctly: 1) There is no "minimal wait time" before an ECU sends the First Frame I think this...

Yes, between consecutive frames. (I think) But the interval pointed out by @MatinF are not defined. I guess the STmin from previous frame could be reused between last frame and...