Nils Steinger

@doomeer Sorry for the late reply, I forgot this issue for a while… I originally asked because I wanted to plan the resources required for the train and rails for...

This is still a useful proposition. What's needed to help it move along?

Also worth noting that separating listing and processing the files will create a race condition: if you generate an *exclusion* list, you might backup files that were created in the...

Here you go: https://gist.github.com/n-st/99dfdd8ebf3304f8f8d1 --- I should add that I can list both the FAT partition with the kernel image and the ext3/4 (not sure at the moment) rootfs from...

I seem to have misplaced my spare SD card at the moment, but I went through this when the system became unbootable after installing the 3.17-bone kernel: A stock image...

Found the SD card, copied and booted [this image](http://debian.beagleboard.org/images/bone-debian-7.5-2014-05-14-2gb.img.xz). > root@beaglebone:~# ls -lh /dev/disk/by-uuid/ > total 0 > lrwxrwxrwx 1 root root 15 Jan 1 2000 06a496b5-e486-40e0-a5f7-396040ea4e56 -> ../../mmcblk0p2 >...

Next test: Copied the contents of the internal MMC to the external SD card (bit-wise, with a few intermediate steps since it probably wouldn't be safe to overwrite the rootfs...

Next test: Using the [stock image](http://debian.beagleboard.org/images/bone-debian-7.5-2014-05-14-2gb.img.xz) from before, flashed the SD card again and installed 3.18.0-bone1 there (after running out of space on the first attempt and resizing the 1.8...

You've got a typo in your code: `sumary` should be `summary`.

Do you have an example of such an incomplete `/proc/cpuinfo`? `lscpu` is only available on Linux systems, not *BSD, so I would need to add a fallback for those. I'd...