k3ng_rotator_controller
k3ng_rotator_controller copied to clipboard
k3ng
K3NG Arduino Amateur Radio Rotator Controller
Hi Anthony K3NG I have written some software that maybe useful for others to control up to 4 relays on a slave unit from the master. I did this to...
Is it possible to get RC servo support and also a better way to enable features,i dont know that much about programming but i cant work out if i have...
Hi I have been trying to workout how the calibration for AZ and Elevation is done on a remote slave unit when sending commands though a master. When talking to...
Hello Anthony and all guys, how can I make a button to calibrate the position AZ=180 and EL=0? I will use the good soft only in *stand alone* and I...
I am JA7FKF Satoh. Thank you for providing a great sketch. Now I am trying to make an AZ / EL rotator. LSM303 is used to detect AZ / EL....
Hello, For EME tracking and using, it is better to track the moon on last 10 seconds of every minute... Due to default behavior of JT65 and similar programs, on...
DS3231 is a low-cost, extremely accurate I2C realtime clock (RTC) with an integrated temperature-compensated crystal oscillator (TCXO) and crystal, and tried to implement with this library but it does not...
When i put #define POLOLU_LSM_303_MIN_ARRAY {-822, -644, -1151} to rotor_settings.h, i get strange behavior of the controller. I set the azimuth, the controller starts rotating the rotor, but when the...
