James Armstrong

Same issue here but I want to be able to use JSON.stringify on the result object and don't want to have to go through and convert / case each field...

I would think all that you mentioned would be part of the ending gcode produced from your slicer. You should be able to add a G28 X0 Y0 to home...

Same again. What does the Smoothie implementation do? Does it use standard 3d printing g/mcodes? I have both Marlin and Repetier builds that support the M3/M5 and a few others...

Emulates or "looks" like the wanhao UI, because if you emulate it, it will be a step backwards ;)

Manual http://www.wanhao3dprinter.com/xiazai/OQD08011_D7_Box.pdf

The main menu / icons look good but everything past that is very basic and plain. No image preview / layer preview or anything.

Correct, SD Detect is not usable on the Melzi and is why you have to unmount and remount the SD card when you make changes. In my Pins.h for board...

Does the Configuration.h file override most stuff? Can he undef then define the detect pin as -1 in the Configuration.h so the standard .h files are not modified?

The Melzi doesn't even have the two headers for the RepRap LCD. How are you wiring this up? The Melzi has an onboard SD card. You could wire up the...

https://groups.google.com/forum/#!topic/wanhao-printer-3d/ZhPeAmiLRak%5B126-150%5D https://3dprinterwiki.info/wanhao/part-specifications/#Firmware