George Zhao

> I have added the debug command to my configuration.yaml and when I attempt to reboot I get the following error and the system will not reboot. > > I...

> Yeah, just did that... It was the cruff hanging around! Gathering logs now. If the device disconnected from HA, It's marked as unavailable, the cause is usually a poor...

> BTW, your integration stopped a serious memory leak my system has had for years! Thanks! > > It almost appears that removing the cruff may have solved the issue,...

> ``` > 2022-08-14 12:39:15.550 DEBUG (Kitchen AC) [custom_components.midea_ac_lan.midea.core.device] [12094627960958] Does not supports the protocol MessageNewProtocolQuery, ignored > ``` It's not a warning or an error or fault something and...

> Ok... caught this. > > ... I told you, if the device disconnected from HA, It's marked as unavailable, the cause is usually a poor Wifi network. You can...

> I was just standing and watching the unit, in eco/auto when it changed fan speed... it disconnected for a second. May be firmware on the unit? If I could...

> Likely what I will do... it makes the thermostat display on my card go unavailable for a second and then it reappears. Did you try to ping the device?

> Likely what I will do... it makes the thermostat display on my card go unavailable for a second and then it reappears. If it bothers you, you can modify...

> Will do, drives my ocd nuts. Can you tell me what that line does? That code sets your device to be unavailable immediately upon disconnection. After you delete that...

> Thanks, worked great! The other improvement you have made is to trim a substantial amount of time off of my reload. If there are no more problems, please close...